Simplex
Booster Systems A
Pre-engineered and fabricated line of packaged single pump booster
systems that provide variable speed technology at an affordable price!
AquaForce
Multi-Pump Booster Systems A
Pre-engineered and fabricated line of packaged multi-pump booster
systems that provide maximum hydraulic capabilities of 1500 GPM and up
to 340 PSI. These systems feature variable speed technology
combined with the use of off-the-shelf motors.
Vertical
Turbine Pumps Floway Series:
F, FR & VF
Flow Rates to: 40,000 GPM
Head Pressures to: 3,465' TDH
Setting: 100 ft.
Temperatures to: 450° F
Horsepowers to: 3,000 HP
Submersible
Turbine Pumps Floway Series:
Submersible
Flow Rates to: 10,000 GPM
Head Pressures to: 1,733' TDH
Setting: 1,500 ft.
Temperatures to: 120° F
Horsepowers to: 500 HP
Drivers: Electric Submersible Motor, 4" - 18"
Canister
Vertical Turbine Pumps Floway Series:
VC, CF & CG
Flow Rates to: 40,000 GPM
Head Pressures to: 6,930' TDH
Temperatures to: 450° F
Horsepowers to: 3,000 HP
Horizontal
Split Case Pumps Goulds/AC
Series: 8300
Flow Rates to: 6,000 GPM
Head Pressures to: 600' TDH
Discharge Sizes to: 10"
Solid Sizes to: 1.12"
Temperatures to: 250° F
End
Suction Centrifugal Pumps Goulds G&L
Flow Rates to: 4,500 GPM
Head Pressures to: 500' TDH
Discharge Sizes to: 8"
Temperatures to: 250° F
Available Constructions: Cast Iron, Bronze Fitted, Stainless Steel
Applications: Water and Light Chemical
Horizontal
Centrifugal Pumps Ebara (End
Suction, Self-Priming, Multi-Stage)
Flow Rates to: 380 GPM
Head Pressures to: 285' TDH
Discharge Sizes to: 2"
Available Constructions: Stainless Steel
Applications: Water, Light Chemical
Multistage
Centrifugal Pumps Goulds G&L
Flow Rates to: 650 GPM
Head Pressures to: 1,200' TDH
Discharge Sizes to: 4"
Temperatures to: 250° F
Available Constructions: Cast Iron, Stainless Steel
Applications: Water Booster, Boiler Feed, Sanitation
Vertical
Multistage Pumps Ebara Series:
EVMU
Flow Rates to: 390 GPM
Head Pressures to: 930' TDH
Discharge Sizes: 1-1/4" to 4"
Applications: Water Booster, Boiler Feed
Utilizes Standard
Off-The-Shelf Motors
Self
Priming Trailer Pumps Power Prime
Flow Rates to: 7,000 GPM
Head Pressures to: 600' TDH
Discharge Sizes: 3" to 12"
Solid Sizes to: 3-1/2"
Applications: Wastewater, Sewage By-Pass
Submersible
Pumps Ebara (Sump
& Sewage)
Flow Rates to: 55,000 GPM
Head Pressures to: 300' TDH
Discharge Sizes to: 64"
Solid Sizes to: 8-1/8"
Available Constructions: Cast Iron, Stainless Steel
Applications: Wastewater, Light Chemical
Sump
and Sewage Pumps Hydromatic
Flow Rates to: 7000 GPM
Head Pressures to: 275' TDH
Discharge Sizes to: 12"
Solid Sizes to: 6"
Available Constructions: Cast Iron
Submersible
Sewage Pumps Gorman-Rupp
Series: JS
Flow Rates to: 15,000 GPM
Head Pressures to: 270' TDH
Discharge Sizes: 4" to 20"
Solid Sizes to: 5.7"
Temperatures to: 104° F
Available Constructions: Cast Iron
Low
Pressure Sewage Systems Series: LPSS
Low pressure sewage
systems that replace individual septic systems with a basin unit that
collects and pumps sewage through an enclosed network of smaller
diameter pipes to a localized treatment facility.
Retractable
Control Systems Series: HRS
This system offers the capability of retracting the entire control
system. Allows for an aesthetically pleasing installation.
For use with any 24" or larger basin.
Air
Operated Diaphragm Pumps ARO / Ingersoll
Rand
Flow Rates to: 275 GPM
Pressures to: 120 PSI
Discharge Sizes to: 3"
Solid Sizes to: 2"
Temperatures to: 350° F
LC
Turbine Flow Meters Flow Rates:
.025-12,000 GPM
Pressures To: 2500 PSI
Port Sizes: ¼" through 12"
Connections: ANSI Flanged, Threaded, Tri-Clover (Sanitary), Flare Tube,
Wafer
Propeller
Flow Meters McCrometer
Series: Mc Propeller (Irrigation) Flow
Rates to: 1 - 15 FPS
Pressures to: 300 PSI
Port Sizes: 2" to 96"
Temperatures to: 160° F
AWWA approved for cold water use
Electric
Motors Baldor offers a
variety of motors for pump applications. Frames include motor
mount and close coupled. These motors are available in singe &
three phase with a number of enclosures.
Vertical
Hollow Shaft Motors U.S. Emerson
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Vertical
Hollow Shaft Motors WEG Type: TP -
High Efficiency
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected Machine Type 1 to NEMA MG 1-1993
(WP-I)
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Aquavar
Variable Speed Controllers Goulds G&L
Controls up to four pumps with auto lead/lag switching control built in.
Utilizes off-the-shelf motors
Horsepower Range: 1/2 to 550 HP
Available Configurations: Wall Mounted, Panel Mounted, Pump Mounted
Applications: Constant Pressure Water Booster Service
Combination
Soft Starters WEG GPH Series
Nema 4 / Nema 12
Single & Three Phase
Horsepowers to: 300 HP (460V)
Automatic Bypass Contactor
Monitoring of Current
Input Power Disconnect with Start & Stop Buttons
Custom
Starter Panels Phoenix Pumps,
Inc. can provide custom starter panels for your pump application.
These UL listed panels are available in a variety of materials to meet
your application requirements.
Relief
Valves Fulflo Series:
V
High quality adjustable hydraulic bypass relief valves to
protect your system.
Pressures: 2 to 1000 PSI
Port Sizes: 3/8" to 2"
Threaded & Flanged
Available Constructions: Cast Iron, Brass, Steel & Stainless Steel
Pneumatic
Accessories Master
Pneumatic
Protect and extend the life of your air operated double diaphragm pump.
MP offers filter / regulator / lubricators & silencer reclassifiers.
Industrial
Line
Card