Enclosed
Full Voltage Starters WEG Nema 1
Industrial Grade
Metallic Lift-Off Enclosure with Knockouts
Bimetallic Overload Relays
Single & Three Phase
Horsepowers to: 25 HP (460V)
Conformity Standards: UL 508, IEC 60947-4-1
Approvals: UL Listed
Enclosed
NEMA4/4X Starters WEG Series:
PESW
Non-Corrosive, Outdoor, Wash Down Rated
Adjustable Thermal Overload Relay
Single & Three Phase
Horsepowers to: 75 HP (460V)
Conformity Standards: UL 508, IEC 60947-4-1
Approvals: UL Listed
Combination
Soft Starters WEG GPH Series
Nema 4 / Nema 12
Single & Three Phase
Horsepowers to: 300 HP (460V)
Automatic Bypass Contactor
Monitoring of Current
Input Power Disconnect with Start & Stop Buttons
Custom
Starter Panels Phoenix Pumps,
Inc. can provide custom starter panels for your pump application.
These UL listed panels are available in a variety of materials to meet
your application requirements.
Retractable
Control Systems Series: HRS
This system offers the capability of retracting the entire control
system. Allows for an aesthetically pleasing installation.
For use with any 24" or larger basin.
Aquavar
CPC Controller Wall
mounted enclosure. Multipump control for up to 4 pumps without
additional PLCs or control panels. Auto lead/lag and switching
control built in. Capable of controlling 3 fixed speed pumps, with
one drive. Horsepower Range: 2 hp - 550 hp. Utilizes
standard off-the-shelf motors.
Aquavar
SPD Controller The Goulds
Aquavar SPD is a constant pressure, simplex variable speed controller
for your pump. This low cost, easy set-up controller does not
require programming!
Aquavar
Motor Mounted Controller Multipump
control for up to 4 pumps without additional PLCs or control panels.
Auto lead/lag and switching control built in. Capable of
controlling 3 fixed speed pumps, with one drive. Horsepower Range:
2 hp - 30 hp Utilizes standard off-the-shelf motors.
AquaBoost
II Controller Single pump
control. House & light commercial use. Wall mounted
enclosure. Horsepower Range: ½ hp - 5 hp. Utilizes standard
off-the-shelf motors.
Power
Load Monitors Viking Series:
M10, M20
Motor Protection For Undercurrent & Overcurrent
Horsepowers to: 999 HP
Shuts down pump
from conditions caused by cavitation, dry-run or over-pressure
Pump
Motor Moisture Detectors Warrick Series:
2800/2810
Voltage: 115V/230V/460V/500V/ 575V
Contact Rating: 16 AMP Resistant 1 HP
Connections: Screw Type
Enclosures: Nema 1, Nema 4, Open
Features: Warning Lamp, Test Button
Applications: Submersible Pumps
VTP
Oil Controller Dripmaster is a
VTP oil lubrication and monitoring controller. The Dripmaster is
designed to extend the life of oil lubricated vertical turbine pumps,
while reducing well contamination.
Pressure
Transducer Kits
Industrial
Line
Card