Electric
Motors Baldor offers a
variety of motors for pump applications. Frames include motor
mount and close coupled. These motors are available in singe &
three phase with a number of enclosures.
Washdown
Electric Motors Baldor
Horsepower Range: 1/2 HP to 20 HP
Single & Three Phase AC & DC Designs
Available in Epoxy Finish or Unpainted Stainless Steel
Applications: Sanitary, High-Pressure Washdown
Vertical
Hollow Shaft Motors U.S. Emerson
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Vertical
Hollow Shaft Motors WEG Type: TP -
High Efficiency
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected Machine Type 1 to NEMA MG 1-1993
(WP-I)
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Submersible
Motors Reliance
Electric
Horsepower Range: ¼ to 700 HP
Frame Sizes: 140TY-5810TY
Single & Three Phase
Insulation: Class F
Service Factor: Three Phase, 1.15
Moisture System: 2 Wire/Two Probe
Seals: Tandem (Dual)
Power
Load Monitors Viking Series:
M10, M20
Motor Protection For Undercurrent & Overcurrent
Horsepowers to: 999 HP
Shuts down pump
from conditions caused by cavitation, dry-run or over-pressure
Air
& Gear Motors Gast Mfg.
Used to convert pumps to Pneumatic Drive.
Temperatures to: 250° F
Available Designs: Body Mount, 56C, IEC
Applications: Explosion Proof
Pump
Motor Moisture Detectors Warrick Series:
2800/2810
Voltage: 115V/230V/460V/500V/ 575V
Contact Rating: 16 AMP Resistant 1 HP
Connections: Screw Type
Enclosures: Nema 1, Nema 4, Open
Features: Warning Lamp, Test Button
Applications: Submersible Pumps
Industrial
Line
Card