» Pumps
» Filtration
» Flow Meters
» Mixers
» Electric Motors
» Controls & Drives
» Accessories
 Products by
» Agriculture
» Asphalt / Aggregate Plants
» Biotech
» Biodiesel / Ethanol Plants
» Chemical
» Commercial
» Food & Beverage
» Irrigation
» Mining
» Petroleum
» Pharmaceutical
» Power Generation
» Semiconductor
» Water
» Wastewater
 Products by
» Phoenix, AZ
» El Paso, TX
» San Diego, CA


Griswold 811 ANSI B73.1 Process Pumps

GRISWOLD’s Model 811 meets or exceeds all ANSI standards for the chemical processing industry.  The fully open impeller, centerline discharge, and other unique design features allow the 811 to continue operating long after other ANSI pumps wear out or break down. For example:

A choice of extra-heavy-duty, stocked, Ductile Iron, Stainless Steel, Alloy 20 and CD4M pump materials coupled with multiple seal design options allows you to tailor the 811 to virtually any process flow application.

The fully-open impeller design features large wear areas and back pump-out vanes, making the 811 far superior in handling corrosive and erosive fluids.  Open impellers balance hydraulic axial thrust loads, lengthen bearing life, and reduce stuffing box pressure too.

The self-tightening impeller with O-ring seal eliminates part corrosion, gasket leakage, and all chance of loosening in high temperature environments.

Replaceable shaft sleeve and adapters allow easy replacement of sealing surface without shaft and bearing disassembly, and without bearing contamination.

Any external clearance adjustments due to wear can easily be made on-site with an ordinary open-end wrench. No shimming is required.

Parts Interchangeable with Goulds 3196 and Peerless 8196 with savings of up to 50%. Same day service on parts with no premium on price.  Griswold’s high-quality ANSI parts are performance-tested to meet performance curves, yet their standard prices are the lowest of any pump manufacturer.

Contact us for our free 30 page ANSI Parts Interchangeability Guide... a valuable tool that cross references Griswold 811, Goulds 3196 and Peerless 8196 pumps by pump size and by part number.

And best of all, the Model 811 is available in a wide range of sizes and capacities to fit virtually any process fluid application. The Griswold 811 ANSI pump can make your life simpler by replacing a warehouse full of pumps, including:

  • Allis Chalmers CSO, 731+
  • Dean
  • Durco Mark II and III
  • Goulds 3196
  • Ingersoll Rand HOC
  • LaBour
  • Peerless 8196
  • Worthington D1000

And all with no piping changes, no baseplate changes and no coupling changes required!

More Info

ANSI Parts & Accessories
Mechanical Seals, coupling guards & C-Face adapters for you Griswold 811, Goulds 3196 & Peerless 8196 ANSI pumps.



Cartridge Seals

Rotating Assemblies

Coupling Guards

Repair Kits

Contact | Careers | Partners | Disclaimer

All Content is Copyright © 1985-2012, Phoenix Pumps, Inc.