Duplex
Pump Fuel Oil Skids Viking Series:
DFO
Flow Rates to: 1,600 GPM
Pressures to: 2,500 PSI
Temperature Range: -40° F to 700° F
Viscosity Range: 28 - 2,000,000 SSU)
ANSI Chemical Process
Pumps Series:
Griswold 811
Flow Rates to: 7000 GPM
Head Pressures to: 730' TDH
Temperatures to: 700°F
Direct Replacement for Goulds 3196
Power
Take-Off Pumps Gorman Rupp
Series: O
Flow Rates to: 1,540 GPM
Head Pressures to: 460' TDH
Discharge Sizes: 2", 3", 4", 6", 8"
Solid Sizes to: 1.19"
Temperatures to: 160° F
Available Constructions: Aluminum, Ductile Iron
Self Priming Trash
Pumps Series: Wemco WSP
Flow Rates to: 3,450 GPM
Head Pressures to: 129' TDH
Discharge Sizes to: 10"
Solid Sizes to: 3"
Available Constructions: Ductile Iron, Stainless Steel, High Chrome,
CD4MCU
Air
Operated Diaphragm Pumps ARO / Ingersoll
Rand
Flow Rates to: 275 GPM
Pressures to: 120 PSI
Discharge Sizes to: 3"
Solid Sizes to: 2"
Temperatures to: 350° F
Flux
Heavy Duty Drum Pumps Air &
electric powered drum pumps for heavy duty applications. Tubesets
are available in Polypropylene, PVDF, Stainless Steel, Aluminum Alloy
& Hastelloy construction. Lengths from 27" to 60".
Flow rates to 60 GPM & pressures to 280' TDH. Mechanical seals
& sealless designs available. Progressive cavity heads
available for high viscosity, high pressure applications.
Filter
Vessels (Bag & Cartridge) Filter
Specialists, Inc.
FSI offers quality
single/multiple bag & cartridge filter vessels available in a
variety of metallurgies for many applications.
Electric
Motors Baldor offers a
variety of motors for pump applications. Frames include motor
mount and close coupled. These motors are available in singe &
three phase with a number of enclosures.
Air
& Gear Motors Gast Mfg.
Used to convert pumps to Pneumatic Drive.
Temperatures to: 250° F
Available Designs: Body Mount, 56C, IEC
Applications: Explosion Proof
Custom
Starter Panels Phoenix Pumps,
Inc. can provide custom starter panels for your pump application.
These UL listed panels are available in a variety of materials to meet
your application requirements.
Combination
Soft Starters WEG GPH Series
Nema 4 / Nema 12
Single & Three Phase
Horsepowers to: 300 HP (460V)
Automatic Bypass Contactor
Monitoring of Current
Input Power Disconnect with Start & Stop Buttons
Relief
Valves Fulflo Series:
V
High quality adjustable hydraulic bypass relief valves to
protect your system.
Pressures: 2 to 1000 PSI
Port Sizes: 3/8" to 2"
Threaded & Flanged
Available Constructions: Cast Iron, Brass, Steel & Stainless Steel
In-Line
Double Reduction Gear Reducers Viking Series:
Size 11 - 100
Gear Ratio Range: 2.60:1
to 35:1
Output Speeds (1750 RPM Input): 673 to 50 RPM
Horsepower Range: .5 to 350 HP
Available Constructions: Aluminum
Sizes 11 through 60 are available in Nema C-Face
Sentry
Pulsation Dampeners
SENTRY®
Pulsation Dampeners / Surge Suppressors remove hydraulic shock and
vibration, enhancing all-around performance and reliability of fluid
flow applications. For sizing, use the SENTRY
SELECTION GUIDE.
Pneumatic
Accessories Master
Pneumatic
Protect and extend the life of your air operated double diaphragm pump.
MP offers filter / regulator / lubricators & silencer reclassifiers.
Mechanical
& Cartridge Seals AESSEAL offers
a variety of standard mechanical & exotic cartridge seals for your
application. Seal kits are available for Flygt, Grindex, Peerless
and many more!
Power
Load Monitors Viking Series:
M10, M20
Motor Protection For Undercurrent & Overcurrent
Horsepowers to: 999 HP
Shuts down pump
from conditions caused by cavitation, dry-run or over-pressure
Line
Card