|
Gorman
Rupp Super-T Series (Engine Driven)
Gorman-Rupp's
Super T Series self-priming centrifugal pumps are designed to
reprime automatically in a completely open system - without a need
for suction or discharge check valves (an optional discharge check
and air release valve is only required when pumping against a
pressurized system). Additionally, there is no need for add-on
vacuum pumps or compressors, which add to owner maintenance and
increase the potential for costly repairs.
Specifications
-
Sizes:
4", 6", 8" and 10"
-
Max
Capacity: 3,500 GPM
-
Max
Head: 140' TDH
-
Max
Solids: 3"
-
Max
Temperature: 160° F
-
Materials
of Construction: Cast Iron
-
Horsepower:
57 HP to 148 HP
Features
External
Shimless Adjustment
 The
external shimless cover plate allows for easy adjustment of the
clearance between the impeller and the wearplate. This process
eliminates the need to realign belts, couplings or other drive
components. In turn, the working height of the seal assembly and
impeller back clearance are not disturbed. The unique collar and
adjusting screw allow for incremental adjustments of he wearplate
clearance with the turn of a hand. Once adjustments have been
made, the collar locks in place maintaining the clearance setting
even if the cover plate is removed. This design doubles the life
of the impeller and wearplate, and keeps the pump operating at
maximum efficiency.
Solids
Handling
 Two-vane,
semi-open solids handling impeller handles up to 3" (75 mm)
diameter solids, depending on pump model. Pump out vanes on
impeller shroud reduce foreign material buildup behind impeller
and reduce pressure on seal and bearings.
Exclusive
Gorman-Rupp Cartridge Seal
Exclusive double-floating, self-aligning, oil lubricated
mechanical cartridge seal with stationary and rotating face of
silicon carbide or tungsten titanium carbide is specifically
designed for abrasive industrial service. Seal is available on
3", 4" and 6" (75 mm, 100 mm and 150 mm) pump
models. Optional seals are also available.
Removable
Cover Plate with "Easy-Grip" Handle
The removable cover plate with "easy-grip" handle and
pusher bolt capability provides quick and easy access to the pump
interior without disconnecting piping. Clogs can be removed and
the pump can be returned to service in minutes. Impeller, seal,
wearplate and flap valve can also be accessed through coverlet
opening for inspection or service.
Removable
Rotating Assembly
Inspection of pump shaft or bearings is easily accomplished
without disturbing pump casing or piping by removing rotating
assembly. Simply remove four bolts from the back of the pump and
the assembly slides out.
Dual
Protection of Bearings
Atmospheric isolation of seal cavity provides positive protect of
bearings. This unique design also provides capabilities for
external monitoring.
|
General
Brochure
