|
Liquid
Controls
LCMag™
Electromagnetic Flow Meters
 Sizes:
1/8" through 72"
- Flow
Rates:
0.05 through 400,000 GPM
- End
Connections:
ANSI Flanged, Wafer, Threaded, Tri - Clover
(sanitary)
- Pressure
Ratings:
150 - 300 ANSI
- Materials
of Construction:
- Housing:
Carbon Steel - 304 SS
- Electrodes:
316 SS - Hastelloy B, C & Titanium
- Liner:
PTFE (Teflon®), Ebonite, EPDM &
Polypropylene
- Accuracy:
Capable of ±0.2% of rate over 10:1 range for flow
velocity between 6 to 33 feet per second
- Repeatability:
Capable of 0.1% of full scale
- Certifications:
HMS 2410 Series models 3-A certified.
|
LCMag™ Meter
- Overview
 The
LCMag family of electromagnetic flow meters offers the best
solution for measuring the flow of electrically conductive
liquids (5µS/cm minimum). A production sensor consists of a
stainless steel pipe section internally lined with insulating
material. PTFE, Polypropylene and Ebonite (hard rubber) liners
are available. The two electrodes are positioned opposite each
other on the internal surface of the pipe. The coils which
generate the magnetic field are placed outside the pipe. The
complete sensor has an external NEMA 6-6P (IP67/68) protection
rating which guarantees the integrity of the magnetic circuit
and protects the instrument against the external environment.
The choice of materials in contact with the fluid (lining,
electrodes, etc.) depends on the temperature, the chemical
aggressiveness of the liquid and the degree of abrasion of the
liquid.
LCMag is the
best electromagnetic flow meter because it provides:
- No
moving parts
- Wide
range of nominal diameters from 1/8" to 80"
- Wide
range of flow rates from 0.05 GPM to 400,000 GPM
- Automatic,
dual flow range capability
- Wide
range of liner and electrode materials
- Near
zero pressure drop
- Easy
installation and operation
- Minimal
maintenance
- High
full scale accuracy, capable of ±0.2% with HML200
Converter (for liquid velocity greater than 3.28ft./second)
- Accuracy
is not affected by fluid characteristics such as viscosity,
density, temperature, or suspended solids
MARKETS:
Specific markets for the LCMag meter include:
- Food
and Beverage
- Pulp
and Paper
- Water
and Waste Water
- Chemical
- Agricultural
- And
more
 APPLICATIONS:
The
LCMag family consists of five types of electromagnetic flow
meters for specific applications. The five models include
microflow, wafer, sanitary, flanged, and insertion meters. The
units are offered in a wide variety of sizes and flow ranges for
many industrial as well as OEM applications.
Typical
application examples include:
- Rate
of flow indication
- Rate
of flow control
- Totalization-batching
- Low
flow rate, additive injection
- Short
run high flow filling applications
- Sanitary
Clean-In-Place (CIP) applications
- High
flow-large pipe diameter water and waste water applications
- Insertion
mag meters for installation in pipes with or without
pressure
|
General
Brochure
