Simplex
Booster Systems A
Pre-engineered and fabricated line of packaged single pump booster
systems that provide variable speed technology at an affordable price!
AquaForce
Multi-Pump Booster Systems A
Pre-engineered and fabricated line of packaged multi-pump booster
systems that provide maximum hydraulic capabilities of 1500 GPM and up
to 340 PSI. These systems feature variable speed technology
combined with the use of off-the-shelf motors.
Air
Operated Diaphragm Pumps ARO / Ingersoll
Rand
Flow Rates to: 275 GPM
Pressures to: 120 PSI
Discharge Sizes to: 3"
Solid Sizes to: 2"
Temperatures to: 350° F
Air
Operated Diaphragm
Pumps Warren Rupp /
Sandpiper
Flow Rates to: 260 GPM
Head Pressures to: 250 PSI
Discharge Sizes to: 4"
Solid Sizes to: 3"
Temperatures to: 350° F
Air
Operated Diaphgram Pumps Yamada
Flow Rates to: 214 GPM
Head Pressures to: 100 PSI
Discharge Sizes to: 3"
Temperatures to: 240° F
Available Constructions: Polypropylene, PVDF, Aluminum, CI, Stainless
Steel, Hastelloy
Non-Clog Dry Pit Pumps Hydromatic
Flow Rates to: 7,500 GPM
Head Pressures to: 275' TDH
Discharge Sizes to: 12"
Solid Sizes to: 6"
Available Constructions: Cast Iron
Immersible
Dry-Pit Pumps Cornell offers
immersible dry-pit non-clog pumps for use in applications where there is
the possibility of flooding. Will withstand up to 30 feet of submergence
for a 2 week period.
Grinders Monoflo Twin
Shaft Grinders
Provide
protection to you pump with high volume, fine grinding of sewage &
sludge.
Flow Rates: 0-6,164 GPM
Pressures: To 87 PSI
Macerator Monoflo
Macerator
Tri-Hammer macerators have been installed worldwide for the efficient
maceration of raw sewage on low flow applications and offer both an
improvement in energy consumption and lower spares prices.
Flow Rates: 0-66 GPM
Peristaltic
Metering Pumps Stenner
Flow Rates to: 170 GPD
Head Pressures to: 100 PSI
Discharge Sizes to: 3/8"
Temperatures to: 125° F
Applications: Chemical Injection
Immersible
Dry-Pit Pumps Cornell offers
immersible dry-pit non-clog pumps for use in applications where there is
the possibility of flooding. Will withstand up to 30 feet of submergence
for a 2 week period.
Progressing
Cavity Pumps Netzsch Series:
NM
Flow Rates to: 2,200 GPM
Pressures to: 680 PSI
Discharge Sizes to: 10"
Available Thru San Diego Location Only.
ANSI Chemical Process
Pumps Series:
Griswold 811
Flow Rates to: 7000 GPM
Head Pressures to: 730' TDH
Temperatures to: 700°F
Direct Replacement for Goulds 3196
ANSI
Chemical Process Pumps Series: Dean pH
Flow Rates to: 3,200 GPM
Head Pressures to: 800' TDH
Temperatures to: 500° F
Available Constructions: Ductile Iron, 316SS, CD4MCu & Alloy 20
Rubber
Rotary Lobe Pumps Holland Pump
Series: LobePro
Flow Rates to: 2,655 GPM
Head Pressures to: 145 PSI
Solid Sizes to: 2.5" (Compressible)
Applications: Municipal Sludge, Waste Oil, Wastewater
Self
Priming Lift Stations Series: PFC6x6
The 6’X6’ above
ground lift station is a pre-engineered, economical station shipped
complete from the factory. Just connect the incoming power and piping
connections to be on line.
Self
Priming Trailer Pumps Power Prime
Flow Rates to: 7,000 GPM
Head Pressures to: 600' TDH
Discharge Sizes: 3" to 12"
Solid Sizes to: 3-1/2"
Applications: Wastewater, Sewage By-Pass
Submersible
Pumps Ebara (Sump
& Sewage)
Flow Rates to: 55,000 GPM
Head Pressures to: 300' TDH
Discharge Sizes to: 64"
Solid Sizes to: 8-1/8"
Available Constructions: Cast Iron, Stainless Steel
Applications: Wastewater, Light Chemical
Sump
and Sewage Pumps Hydromatic
Flow Rates to: 7000 GPM
Head Pressures to: 275' TDH
Discharge Sizes to: 12"
Solid Sizes to: 6"
Available Constructions: Cast Iron
Sump
and Sewage Pumps Goulds G&L
Flow Rates to: 1,150 GPM
Head Pressures to: 240' TDH
Discharge Sizes to: 4"
Solid Sizes to: 3"
Available Constructions: Cast Iron, Stainless Steel
Applications: Dewatering and Sewage
Low
Pressure Sewage Systems Series: LPSS
Low pressure sewage
systems that replace individual septic systems with a basin unit that
collects and pumps sewage through an enclosed network of smaller
diameter pipes to a localized treatment facility.
Vertical
Turbine Pumps Floway Pumps
Flow Rates to: 150,000 GPM
Head Pressures to: 6,930' TDH
Setting: 100 ft.
Temperatures to: 450° F
Horsepowers to: 3,000 HP
Configurations Available: Lineshaft, Submersible, Canister
Applications: Municipal, Mining, Fire
Electric
Motors Baldor offers a
variety of motors for pump applications. Frames include motor
mount and close coupled. These motors are available in singe &
three phase with a number of enclosures.
Vertical
Hollow Shaft Motors U.S. Emerson
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Vertical
Hollow Shaft Motors WEG Type: TP -
High Efficiency
Three Phase, 4 Pole, 60Hz
Voltage: 208, 230/460V
Enclosure: Open Weather-Protected Machine Type 1 to NEMA MG 1-1993
(WP-I)
Class 'F' Insulation
Oversized Angular Contact Bearing and Ball Bearing
Non-Reverse Coupling (Ball Type) Included
Submersible
Motors Reliance
Electric
Horsepower Range: ¼ to 700 HP
Frame Sizes: 140TY-5810TY
Single & Three Phase
Insulation: Class F
Service Factor: Three Phase, 1.15
Moisture System: 2 Wire/Two Probe
Seals: Tandem (Dual)
Custom
Starter Panels Phoenix Pumps,
Inc. can provide custom starter panels for your pump application.
These UL listed panels are available in a variety of materials to meet
your application requirements.
Combination
Soft Starters WEG GPH Series
Nema 4 / Nema 12
Single & Three Phase
Horsepowers to: 300 HP (460V)
Automatic Bypass Contactor
Monitoring of Current
Input Power Disconnect with Start & Stop Buttons
Aquavar
Variable Speed Controllers Goulds G&L
Controls up to four pumps with auto lead/lag switching control built in.
Utilizes off-the-shelf motors
Horsepower Range: 1/2 to 550 HP
Available Configurations: Wall Mounted, Panel Mounted, Pump Mounted
Applications: Constant Pressure Water Booster Service
Retractable
Control Systems Series: HRS
This system offers the capability of retracting the entire control
system. Allows for an aesthetically pleasing installation.
For use with any 24" or larger basin.
Power
Load Monitors Viking Series:
M10, M20
Motor Protection For Undercurrent & Overcurrent
Horsepowers to: 999 HP
Shuts down pump
from conditions caused by cavitation, dry-run or over-pressure
Pump
Motor Moisture Detectors Warrick Series:
2800/2810
Voltage: 115V/230V/460V/500V/ 575V
Contact Rating: 16 AMP Resistant 1 HP
Connections: Screw Type
Enclosures: Nema 1, Nema 4, Open
Features: Warning Lamp, Test Button
Applications: Submersible Pumps
Mechanical
& Cartridge Seals AESSEAL offers
a variety of standard mechanical & exotic cartridge seals for your
application. Seal kits are available for Flygt, Grindex, Peerless
and many more!
Mechanical
Seals Includes Flush,
Quench and Drain connections for maximum environmental control
capability.
Distributed flush arrangement maximizes cooling effect, prevents
clogging and reduces thermal distortion.
Packing Chesterton's
superior packing will reduce leakage & wear, while improving the
life of your equipment.
T05 Seal Kits for Flygt
Pumps AESSEAL offers
seal kits for Flygt submersible pumps. Kits include upper/lower
seals, bearings & o-rings. Special tools not required!
Industrial
Line
Card