FSI X100 Convertible Filter Vessels

FSI's X100 convertible filter housing provides an excellent, low-cost alternative to other types of filter housings.  Manufactured from polypropylene with a UV inhibitor for all-weather durability, X100 housings are strong, lightweight and economical.  Resistant to a wide range of chemicals for a wide range of industrial applications, the X100 will precisely fit your particular needs.

X01 Filter Bag
Measuring 6" in diameter by a length of 20", the X01 Filter Bag has 2 square feet of surface area (.0186 square meters), makin it equivalent to a standard #1 size bag.  The X01 is fitted with the patented Polyloc® Ring that seals directly against the wall of the filter housing and eliminates the chance of fluid by-pass

A heavy-duty Polypropylene Restrainer Basket supports the X01.  The Polyloc® Ring sits directly against the basket collar for additional bag support.

X20 Fiter Cartridge
The X20 Cartridge is a steep pore gradient, depth filter designed to have a large dirt loading capacity.  The X20 measures 5.5" in diameter, with a length of 23.25", yielding a total cartridge volume of 500 cubic inches.  In laboratory tests, the X20 has outperformed standard 10" cartridges by holding 20 times the volume of dirt.

The design of the X20 Polyseal Cartridge features a single open end that directs fluid from outside the cartridge in through the filter.  A built-in handle on the cartridge top assists in seating and removing the X20.  The cartridge bottom is equipped with FSI's patented Polyseal End Fitting to ensure a by-pass-free sealing without the need for double O-rings or flat gaskets.  Fitting securely into the cartridge plate, the X20 does not require springs, hold-down plates or center posts.