Aquavar IPC Variable Speed Controller

The Aquavar® Intelligent Pump Controller from CentriPro utilizes an all new Aquavar platform, and combines it with over 20 years of variable speed pumping experience. The Aquavar is designed to provide variable frequency pumping control of speed, pressure, flow and level over a wide range of submersible and above ground applications. Here are just a few of the features and benefits of this versatile product:

  • Application specific "Start-Up Genie" guides you through quick and easy commissioning
  • Removable, graphical control panel with display
  • Fully backlit display with large text makes the control pad easy to read
  • Info key activates on board parameter and fault descriptions
  • My Personal Menu allows user to focus on specific user selected and saved parameters
  • Alarm Log key for quick access to alarms and maintenance events
  • Alarm Log records the last 5 alarms
  • Hand on, Auto on, and Off buttons for easy pump operation at the keypad - no toggling between local and remote operation!
  • Modbus® RTU included in standard drive - Other communications available with option cards
  • Capable of controlling up to 2 fixed speed pumps, with one standard drive
  • Duplex variable speed pumping control with auto lead/lag and alternate
  • USB Connectivity - Commission and monitor through PC software
  • Transducer assembly (0-300 psi) and 16' foot shielded cable
  • Standard dual DC-link reactors - Reduces the level of harmonics similar to a 5% AC line reactor without the voltage drop across the full load range!
  • EMC/RFI filters designed to reduce drive noise emissions and interference to strict standards
  • Automatic Motor Adaption - For optimized performance and efficiency
  • Automated Energy Optimization - Regulates output voltage to improve system efficiency as loads change
  • Protects the pump from damage due to cavitation, dead head and blocked suction
  • Helps protect the motor from short circuit, phase loss, overload, under voltage, over voltage
  • Large connection area allows more space for incoming power and motor wiring
For additional information: Manufacturer's Website open_in_new


Horsepower Range1.5 HP - 600 HP
Input Power200-240V 1PH, 200-240V 3PH, 380-480V 3PH, 525-600V 3PH
MountingWall / Cabinet
Multi-Pump ControlYes
Multi-Pump QuantityUp to 4 Variable Speed or 2 Slave Pumps
Rated Temperature14 °F to 104° F (Up to 122°F by Derating by 10%

Options & Accessories

9K399 Transducer Cable
30 foot transducer cable for use with Goulds Aquavar IPC, SPD, Hydrovar & CPC pump controllers.  Included with drives.
9K712 Pressure Transducer
Pressure transducer for use with Goulds Aquavar IPC, SPD, Hydrovar & CPC pump controllers.  Included with drives.
AquaBoost Variable Speed Booster Systems
AquaBoost Advanced Packaged Systems are simple to specify, simple to install and simple to set up. Best of all, with Xylem’s single-source responsibility and technical expertise, it’s sim...
More Info
AquaForce Variable Speed Booster Pump Systems
The AQUAFORCE e-MT variable speed packaged pressure boosters are pre-fabricated and designed for maintaining a constant clean water delivery pressure. The AquaForce e-MT are pre-configured for 2-4 pu...
More Info
NPE/NPO Stainless Steel End Suction Pumps
The Goulds NPE/NPO end suction centrifugal pump feature a 316L stainless steel casing, centerline suction and discharge ports, and prime/drain connections. The NPE is designed for clean fluids, while ...
More Info
e-SV Vertical Multistage Centrifugal Pumps
Energy saving, eco-friendly, efficient: The new Goulds e-SV design allows easy service and safe maintenance. The mechanical seal can be replaced without removing the motor from the pump!

More Info
Request a Quote
Phoenix Pumps Building
If you are located in Arizona, New Mexico, or Nevada, please fill out the form below.